Echo
Standard Features:
- One color Naugahyde material
- Folding helm hinge made out of powder coated aluminum
- ¾ MDO plywood
Options:
- Armrests
- Ballistic nylon material upgrade
- Seaboard upgrade
Dimensions:
- Overall width w/out arms –18”
- Overall width with arms – 25”
- Overall depth – 24”
- Cushion depth – 18”
- Height – 25”
- Shipping box – 22 x 10 x 20
- Shipping weight – approx. 23 lbs
Four Legged Seat Stand – 13″ & 16″
Allows you to move the seat anywhere in the boat. You can add a seat or leave one at home. Available in 13″ & 16″ heights. All aluminum construction keeps the stand light. The top-mounting pad has a hole pattern for a swivel or direct seat mounting.
Bentley part # 101164 – 13″
# 101163 – 16″
Swivel Footrest
Mounts to the pedestal post with a split-mounting bracket and internal plastic collar bushing. Easy swivel adjustment, without marking the pedestal post. Lower locking collar for vertical adjustment. Can be installed without removing the seat.
Bentley part # 100654
Universal Trac-Lock II Chair Slide
The universal trac-lock II chair slide allows you to mount your seat to a box or pedestal. The dimensions are 7-1/4″ x 13″ x 2″ and will add 2″ to the height of your seat. It has the ability to travel forward and backward 4 1/2″.
Bentley part # 100642
Second Generation Pedestal Set
This 2 piece set comes with the following parts:
- 2-7/8″ post in a satin finish with a 9″ low-profile base
- 2-7/8″ trac-lock swivel
They are available in heights of 12″, 18″, 24″, and 30″.
These swivels are compatible with the swivel footrest and the universal trac-lock slide.
Bentley part # 100643 – 12″
# 100644 – 18″
# 106645 – 24″
# 106646 – 30″
Mainstay Pedestal
This pedestal offers an air-powered height adjustment ranging from 14″ to 20″. It has a 2-3/8″ post with a 9″ round base and an anodized finish. The mainstay comes standard with a non-locking track-lock swivel.
Two available sizes:
Regular: 14-1/2″ to 19-1/2″
Short: 12-1/2″ to 15-1/2″
Bentley part # 100647 – regular
# 100648 – short
Seat Swivel – Non-locking
Non-locking 7″ square seat swivel with a 4-hole pattern used for attachment to a boat seat.
Available in either a black e-coated or stainless steel finish.
Bentley part # 100639 – black e-coated
Bentley part # 100640 – stainless
Top, Sides, and Camper Extension
The top, sides, and camper extension package allows the boater to be fully enclosed. The forward top comes back on the boat to cover approximately 6 feet of the cockpit area. The camper section then zips to the back edge of the front top and goes back to the stern for a full enclosure that has headroom to the stern of the boat. This package is perfect for the boater that likes to cruise, camp or fish. Comes with non-corrosive fasteners, heavy-duty #10 YKK zippers, 7/8” anodized aluminum frame, nylon fittings, marine grade material, and windows in all curtains using .030 gauge plastic. This style of top is typically manufactured using either Top Gun or Sunbrella material.
Additional options available include but are not limited to…
-
Top Boot
-
Storage bags
-
Additional rear entry points in extension (1 standard)
-
Bar supports
-
Double wall bows
Top Complete – Top, Sides, & Stern cover
Our top complete is a standard package which includes a top, side curtains, and a stern cover. The top is supported by an 7/8″ aluminum frame complete with nylon fittings. Most tops have a two bow frame unless the span between the bows will be more than 40″. If that is the case, then a third bow will be added. The stern cover zips to the back edge of the top and slopes back to the stern of the boat. This package is perfect for the boater that wants a top to get out of the weather and a full cockpit enclosure when moored or stored. Constructed with non-corrosive fasteners, heavy-duty #10 YKK zippers, 7/8” anodized aluminum frame, nylon fittings, marine grade material and windows in the side curtains using .030 gauge plastic. This style of top is typically manufactured using either Top Gun or Sunbrella material.
Additional Options include but are not limited to…
- bar supports (front or rear)
- top boot
- double wall frame
- 2 zipper hatch in top
Bimini Top
The Bimini top is able to mount on any boat to the tower or gunnels. Our custom tops allow the boat owner to choose the height and length to fit specific needs. This is a 3 bow top typically manufactured using Sunbrella material which is available in a multitude of color choices. This top is popular on tournament or ski boats and is perfect for those of us who need a break from the sun.
Additional options available include but are not limited to…
- top boot
- upgrade to stainless steel fittings