Bow Cover
The Bow cover is custom made for the boat with the open bow. Fastens to the underside of the walk through windshield and snaps on the gunnel’s edge around the bow perimeter. Perfect for keeping wind and spray from coming in through the opening under the walk through windshield, protects the upholstery, and goes well with the Tonneau cover. Comes with non-corrosive fasteners and cover supports. This style of cover is manufactured using Sunbrella material.
Mooring Cover
The Mooring cover is custom fit to each individual boat. It covers from bow to stern over the windshield and protects the entire cockpit area, deck and gunnels. Fits snug to the boat with a 6” overhang below the bump rail. It has a full perimeter ¼” nylon drawstring sewn in to provide for cover adjustment. Any area of the cover that has a point of contact with the boat is reinforced with a second layer of material to help with wear & tear. In conjunction with the drawstring, the cover can either be fastened to the boat with tab snaps for mooring or tied down to the trailer for a secure hold with webbing straps and quick release buckles.. This style of cover is manufactured using Sunbrella material.
Sleeper Seat – small & large
A sturdy aluminum double action scissor mechanism allows the seat to fold down to a sleeper position of 70 inches in length with the large and 68 inches with the small seat. All Bentley’s Back-to-Back seats come standard with bases and mounting hardware. The base provides useful storage 
space. Standard base height yields 12″ from the floor to the seat cushion surface. However, you can custom order your seats with any base height that suits your needs. Storage access cutouts are an option on the side of the seat base on taller units.
Choose up to three colors of Naugahyde vinyl to upholster the seat in a color scheme that compliments your existing boat upholstery.
Stationary back-to-back seat – small & large
Easy access storage!
The stationary backrest design of this seat yields considerable strength to the structure. Its style matches the Sportsman.
The cushions are hinged for easy access to the storage area. All Bentley’s Back-to-Back seats come standard with bases and mounting hardware. The 
base provides useful storage space. Standard base height yields 12″ from the floor to the seat cushion surface. However, you can custom order your seats with any base height that suits your needs. Storage access cutouts are an option on the side of the seat base on taller units.
Choose up to three colors of Naugahyde vinyl to create the look and style that suits your boat.
Mariner Regular Duty
(Sewn in Bentley’s Hurricane Style) Trim: Smoke / Insert: Mist (standard plain) / No welt (Top stitched)
Standard Features:
- Knee action mechanical suspension
- Regular duty with single shock absorber (designed for use by persons under 250 lbs)
- 6” fore-aft double locking slide adjustment
- Adjustable backrest – up to 5”
- Folding armrests & contoured lumbar support
- Map/chart pockets
Options:
- Heavy duty swivel base w/ 90º positional locks (installed on this seat – adds 4” to height)
- Logos
- Severe duty double shock absorber (designed for use by persons over 250 lbs or use in rough water)
- Original sewing style with welt – use up to 3 colors of quality 29.7 oz Naugahyde
- Hurricane sewing style – use up to 2 colors of Naugahyde – no welt sewn on with this style
- Ballistic nylon upgrade
Dimensions:
- Overall width – 24”
- Width inside arm to inside arm – 18”
- Overall depth – 23” to 28”
- Cushion depth – 17”
- Height – 38” (w/ swivel 42”)
- Shipping – Chassis box: 23 x 16 x 16 Cushion box: 25 x 12 x30
- Shipping weight – Chassis box: 68 lbs Cushion box: 29 lbs
Mariner Severe Duty
(Sewn in Bentley’s regular style) Trim: Smoke / Insert: Mist (standard pleated)/ Welt: Smoke
Standard Features:
- Knee action mechanical suspension
- Severe duty with two shock absorbers (designed for use by persons over 250 lbs or use in rough water)
- 6” fore-aft double locking slide adjustment
- Adjustable backrest – up to 5”
- Folding armrests & contoured lumbar support
- Map/chart pockets
Options:
- Heavy duty swivel base w/ 90º positional locks (installed on this seat – adds 4” to height)
- Logos
- Regular duty single shock absorber (designed for use by persons under 250 lbs)
- Original sewing style with welt – use up to 3 colors of quality 29.7 oz Naugahyde
- Hurricane sewing style – use up to 2 colors of Naugahyde – no welt sewn on with this style
- Ballistic nylon upgrade
Dimensions:
- Overall width – 24”
- Width inside arm to inside arm – 18”
- Overall depth – 23” to 28”
- Cushion depth – 17”
- Height – 38” (w/ swivel 42”)
- Shipping – Chassis box: 23 x 16 x 16 Cushion box: 25 x 12 x30
- Shipping weight – Chassis box: 68 lbs Cushion box: 29 lbs
Mariner Swivel
Standard Features:
- Allows mariner seat to swivel 360 degrees while locking every 90 degrees
- Adds 4″ to the overall height of the seat
- Mounts to the floor of the boat
Dimensions:
- Width – 13”
- Depth – 13”
- Height – 4”
- Shipping – 20 x 13 x 10
- Shipping weight – 34 lbs (if one per box) or 68 lbs (if two per box)
Mariner boot
Gives the chassis protection from the elements as well as “cleaning up” the look of the seat by hiding the metal portion of the chassis.
Still allows the seat to slide fore and aft and height adjust
Manufactured standard in black ballistic nylon
Low Back Bucket
Armrest comfort with removable cushion
This Low Back Bucket is constructed with 3/4″ MDO plywood and fiberglass reinforcement for extra strength and durability. It features an integrated armrest for comfort and a removable cushion. Blends well with low profile speed boats.
Choose from our selection of Naugahyde vinyl colors for a quality seat that works with the color scheme of your vessel.
Standard Helm
Standard Features:
- Use up to 3 colors of quality 29.7 oz. Naugahyde
- Folding helm hinge made out of powder coated aluminum
- ¾ MDO plywood
Options:
- Armrests
- Standard Helm – large – 2” larger
- Seaboard upgrade
- Ballistic nylon material upgrade
- Customer’s own material
- Headrest
- Heated cushion and/or backrest
- Variable width
Dimensions:
- Overall width w/out arms – 17”
- Overall width with arms – 24”
- Overall depth – 22”
- Cushion depth – 17”
- Height – 22”
- Shipping box – 22 x 10 x 20
- Shipping weight – approx. 23 lbs